Panasonic CF-31 Operating Instructions Manual page 30

Troubleshooting (Basic)
„ Entering Password
Even after entering the pass-
word, password input screen
is displayed again.
Cannot log on to Windows.
("The user name or pass-
word is incorrect." is dis-
played.)
„ Shutting down
Windows does not shut
down.
„ Display
No display.
The screen is dark.
The screen does not be-
come bright even if pressing
Fn + F2.
The screen is disordered.
During Simultaneous display,
one of the screens becomes
disordered.
The external display does
not work normally.
30
l The computer may be in ten-key mode.
If the NumLk indicator
input.
l The computer may be in Caps Lock mode.
If the Caps Lock indicator
mode, and then input.
l The user name (account name) includes the "@" mark.
- If another user account name exists:
Log on to Windows using another user account name, and delete the account name
that includes "@". Then create a new account name.
- If no other account name exists:
You need to reinstall Windows (è page 24).
l Remove the USB device and the ExpressCard.
l Wait 1 or 2 minutes. It is not a malfunction.
l The external display is selected. Press
Wait until the display has been switched completely before pressing
P again.
l When using an external display,
Ÿ Check the cable connection.
Ÿ Turn on the display.
Ÿ Check the settings of external display.
l The display is turned off by the power-saving function. To resume, do not press the
direct selection keys, but press any other key like
l The computer entered sleep or hibernation by the power-saving function. To resume,
slide the power switch.
l The screen is darker when the AC adaptor is not connected. Press
the brightness. As you increase the brightness, battery consumption increases.
You can separately set the brightness for when the AC adaptor is connected and when
not connected.
l Press Fn + F8 to turn off the concealed mode.
l The brightness is set low to avoid malfunction where surrounding temperature is high.
Use it in an environment of between -10 °C and 50 °C {14 °F to 122 °F}.
l Changing the number of display colors and resolution may affect the screen. Restart the
computer.
l Connecting/disconnecting an external display may affect the screen. Restart the com-
puter.
l Resuming from sleep or hibernation may affect the screen of the external display.
Restart the computer.
l When using the Extended Desktop, use the same display colors for the external display
as those used by the LCD.
l Simultaneous display cannot be used until Windows startup is complete (during Setup
Utility, etc.).
l If the external display does not support the power saving function, it may not work nor-
mally when the computer enters the power saving mode. Turn off the external display.
NumLk to disable the ten-key mode, and then
lights, press
Caps Lock to disable the Caps Lock
lights, press
Fn + F3 or
Ctrl .
P to switch the display.
+
Fn + F3 or
Fn + F2 and adjust
+