Panasonic CF-31 Operating Instructions Manual page 29

„ Starting Up
The date and time are incor-
rect.
[Executing Battery Recali-
bration] screen appears.
[Enter Password] does not
appear when resuming from
sleep/hibernation.
Cannot resume.
Other startup problems.
l Make the correct settings.
A Open the Control Panel.
1. Right-click any empty location on the Start screen.
2. Click [All apps] on the app bar.
3. Click [Control Panel] under "Windows System".
Click (Start) - [Control Panel].
B Click [Clock, Language, and Region] - [Date and Time].
l If the problem persists, the internal clock battery may need to be replaced. Contact
Panasonic Technical Support (è pages 39 - 43).
l When the computer is connected to LAN, check the date and time of the server.
l The 2100 A.D. or later year will not be correctly recognized on this computer.
l The Battery Recalibration was cancelled before Windows was shut down last time. To
start up Windows, turn off the computer by the power switch, and then turn on.
l Select [Enabled] in [Password On Resume] in the [Security] menu of the Setup Utility
(è Reference Manual "Setup Utility").
l The Windows password can be used instead of the password set in the Setup Utility.
A Open the Control Panel.
1. Right-click any empty location on the Start screen.
2. Click [All apps] on the app bar.
3. Click [Control Panel] under "Windows System".
Click (Start) - [Control Panel].
B Click [User Accounts and Family Safety] - [Add or remove user accounts].
C Click [System and Security] - [Power Option] - [Require a password when the com-
puter wakes] and add a check mark for [Require a password].
l One of the following operations may have been carried out. Slide the power switch turn
on the computer. Data not saved will be lost.
Ÿ In sleep mode, the AC adaptor or battery pack was disconnected, or a peripheral was
connected or disconnected.
Ÿ The power switch was slid for four seconds or longer to forcibly turn off the computer.
l An error may occur when the computer automatically enters the sleep or hibernation
mode while the screensaver is active. In this case, turn off the screensaver or change
the pattern of the screensaver.
F9 in the Setup Utility (è
l Press
Setup Utility settings (excluding the passwords) to the default values. Start the Setup
Utility and make the settings again.
l Remove all peripheral devices.
l Check to see if there was a disk error.
A Remove all peripheral devices including an external display.
B Open "Computer"
1. Right-click any empty location on the Start screen.
2. Click [All apps] on the app bar.
3. Click [Computer] under "Windows System".
Click (Start) - [Computer].
C Right-click [Local Disk (C:)], and click [Properties].
D Click [Tools] - [Check Now...].
Ÿ A standard user needs to enter an administrator password.
E Select the option in [Check disk options] and click [Start].
F Click [Schedule disk check] and restart the computer.
l
Start the computer in Safe Mode and check the error details. When the [Panasonic] boot
*1
screen disappears at startup, press and hold
Menu is displayed. Select the Safe Mode and press
*1
When [Password on boot] is set to [Enabled] in the [Security] menu of the Setup Utility,
[Enter Password] appears after the [Panasonic] boot screen disappears. As soon as you
enter the password and press
Reference Manual "Setup Utility") to return the
F8 until the Windows Advanced Options
Enter .
Enter , press and hold F8 .
29