Radio; Dab/Dab - Panasonic SC-PMX9DB Operating Instructions Manual

Radio

30 FM stations can be preset.
Preparation
Press [SELECTOR] repeatedly to select "FM".
Automatic presetting
1
Press [RADIO MENU] to select "Auto Preset".
2
Press [2, 1] to select "Lowest" or "Current"
frequency.
3
Press [OK] to start presetting.
To cancel, press [∫].
Manual tuning and presetting
1
Press [6] or [5] to tune in to the station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
Selecting a preset station
Press the numeric buttons, [:] or [9] (main
unit: [:/6] or [5/9]) to select the preset
station.
Improving the sound quality
1
Press [RADIO MENU] repeatedly to select "FM
Mode".
2
Press [2, 1] to select "Mono" and then press
[OK].
To cancel, select "Stereo".
"Mono" is also cancelled when you change the
frequency.
To memorise the setting
Continue with steps 2 and 3 of "Manual tuning and
presetting".

DAB/DAB+

This system support DAB in "BAND III" bands.
Preparation
Press [SELECTOR] repeatedly to select "DAB/DAB+".
If you select "DAB/DAB+" for the first time, the system
will start the "DAB Auto Scan" procedure.
Note:
• If no station is detected, "Scan Failed" is shown. Adjust
the antenna and try again.
DAB auto scan
1
Press [RADIO MENU] to select "Auto Scan" and
then press [OK].
"Start?" is shown.
2
Press [OK].
"DAB Auto Scan" is shown.
DAB manual tuning
To find the best antenna position, use manual tuning to
search selected DAB frequency block.
Preparation
Select the desired "Scan Mode" (
1
Press [RADIO MENU] repeatedly to select "Manual Scan".
2
Press [2, 1] to select a frequency block to scan
and then press [OK].
Memory presetting
1
Press [6] or [5] to select a station.
2
Press [PROGRAM].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
Note:
• A station previously stored is overwritten when another
station is stored in the same preset number.
• You cannot preset a station when the station is not
broadcasting or when you have selected a secondary service.
• Previous station memory is cleared during auto scan.
Selecting a preset station
Press the numeric buttons, [:] or [9] (main unit:
[:/6] or [5/9]) to select the preset station.
Viewing available information
You can view information about the DAB broadcast,
programme type, ensemble label, frequency and time.
Press [DISPLAY] to view available information.
DAB settings
1
Press [RADIO MENU] to select an option.
2
Press [2, 1] to select the desired setting and
then press [OK].
DAB Secondary
Primary
Secondary
Auto Clock Adj
On Adjust
Off Adjust
Scan Mode
"DAB settings").
Local
All Band III
DAB signal quality
When adjusting the antenna, you can check the
reception quality.
1
Press [RADIO MENU] repeatedly to select "Signal
Quality".
2
Press [2, 1] to select frequency.
Frequency
To listen to primary service.
To listen to secondary services.
" " is shown.
Start auto clock adjustment.
Cancel auto clock adjustment.
Scan stations on frequencies used in
your region.
Scan stations on other frequencies.
Reception quality 0
Frequency block (poor) to 8 (excellent)
13