Bluetooth ® Operations; About Bluetooth - Panasonic SC-PMX9DB Operating Instructions Manual

Bluetooth operations
®
By using the Bluetooth connection, you can listen to the
®
sound from the Bluetooth audio device from this system
®
wirelessly.
Refer to the operating instructions of the Bluetooth
device for details.
Pairing Bluetooth devices
®
Preparation
• Turn on the Bluetooth feature of the device and place
®
the device near this system.
• If this system is already connected to a Bluetooth
device, disconnect it.
1
Press [SELECTOR] repeatedly to select
"BLUETOOTH".
If "Pairing" is indicated on the display, go to step 3.
2
Press [PLAY MENU] to select "New Device" and
then press [OK].
"Pairing" is indicated on the display.
3
Select "SC-PMX9" from the Bluetooth
Bluetooth menu.
®
4
Start play on the Bluetooth device.
®
Note:
• If prompted for the passkey, input "0000".
• You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Connecting a paired Bluetooth
Preparation
• Turn on the Bluetooth feature of the device and place
®
the device near the speakers.
• If this system is already connected to a Bluetooth
device, disconnect it.
1
Press [SELECTOR] repeatedly to select
"BLUETOOTH".
"Ready" is indicated on the display.
2
Select "SC-PMX9" from the Bluetooth
Bluetooth menu.
®
The name of the connected device is indicated on
the display for 2 seconds.
3
Start play on the Bluetooth ® device.
Note:
• This system can only be connected to one device at a time.
• When "BLUETOOTH" is selected as the source, this
system will automatically try and connect to the last
connected Bluetooth
• The Bluetooth device will be disconnected if a different
®
® audio source (e.g., "CD") is selected.
Bluetooth transmission mode
®
You can change the transmission speed to prioritize
transmission quality or sound quality.
• The default setting is "Mode 1".
• To enjoy a higher sound quality, select "Mode 2".
®
Preparation
• Press [SELECTOR] repeatedly to select "BLUETOOTH".
• If a Bluetooth device is already connected, disconnect
®
it.
1
Press [PLAY MENU] repeatedly to select
"Link Mode".
2
Press [2, 1] to select the mode and then press
[OK].
Mode 1: Emphasis on connectivity
® device's
Mode 2: Emphasis on sound quality
Bluetooth input level
®
If the sound input level of the Bluetooth
too low, change the input level setting.
Preparation
• Connect a Bluetooth
1
Press [PLAY MENU] repeatedly to select "Input Level".
device
®
2
Press [2, 1] to select the level and then press [OK].
"Level 0" ,. "Level i1"
^-----------------------------------------J
Note:
®
• Select "Level 0" if the sound is distorted.
Disconnecting a Bluetooth
1
While a Bluetooth
Press [PLAY MENU] to select "Disconnect?".
device's
®
2
Press [2, 1] to select "OK? Yes" and then press
[OK].
device.
®
transmission is
®
® device.
,. "Level i2"
device
®
device is connected:
®

About Bluetooth

®
Panasonic bears no responsibility for data and/or
information that is compromised during a
wireless transmission.
Frequency band used
• This system uses the 2.4 GHz frequency band.
Certification of this device
• This system conforms to frequency restrictions and
has received certification based on frequency laws.
Thus, a wireless permit is not necessary.
• The actions below are punishable by law in some
countries:
- Taking apart or modifying this system.
- Removing specification indications.
Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
equipped devices is not guaranteed.
• All devices must conform to standards set by Bluetooth
SIG, Inc.
• Depending on the specifications and settings of a
device, it can fail to connect or some operations can be
different.
• This system supports Bluetooth ® security features. But
depending on the operating environment and/or
settings, this security is possibly not sufficient.
Transmit data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth
device.
Range of use
• Use this device at a maximum range of 10 m.
The range can decrease depending on the
environment, obstacles or interference.
Interference from other devices
• This system may not function properly and troubles
such as noise and sound jumps may arise due to radio
wave interference if this system is located too close to
other Bluetooth ® devices or the devices that use the
2.4 GHz band.
• This system may not function properly if radio waves
from a nearby broadcasting station, etc. is too strong.
Intended usage
• This system is for normal, general use only.
• Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals, laboratories,
etc).
®
®
11