Thread Catcher Height - Pfaff 1425 Instruction Manual

11 Thread-catcher height
.06.02
Requirement
The lower edge of thread catcher 3 must clear bobbin 4 case by about 0.8 mm.
4
Fig. 11 - 30
Loosen screws 1 and 2.
Set thread catcher 3 above bobbin case 4.
Re-position thread catcher 3 (screw 5) according to Requirement.
Balance out the vertical play of shaft 6, set fixing collar 7 against bearing housing 8 and
tighten screw 2.
3
4
For further adjustments leave screw 1 untightened.
5
Adjustment
6
2
7
8
1
3
11 - 33