Table of Contents
Advertisement
Base ground work
150mm (6 inch) or more
Drain hole
< When installing on the ground >
X The outdoor unit should be supported within the range of measurement below for base ground work .
X
Anchor bolt position
620 (24 . 4 0)
940 (37 . 0 0)
X When the outdoor unit needs to be supported, fix it with wire as shown in the
X
picture .
- Slightly unwind the four screws on the cover top of the outdoor unit .
- Wind wires round the four screws and fasten the screws again .
- Fix the wires to the ground .
• If the outdoor unit is not fixed securely, product may fall and it might cause loss of life or property damage .
• Do not install the outdoor unit on a wood palette .
CAUTION
• Fix the outdoor unit securely to the base ground with anchor bolts .
• The manufacturer is not responsible for the damage occurred by not adhering to the standard of the installation .
• To protect the outdoor unit from external condition such as rain, install it on the base ground and connect the
drain pipe to the drainage .
AM0@@FXMDCH_IM_EN_03408A(1).indd 11
Install the outdoor unit
horizontally on the ground
150mm (6 inch) or more
< When installing on the roof >
Unit: mm (inch)
11
2013-03-04 오후 4:28:15
Hide quick links:
Advertisement
Table of Contents
