Table of Contents
Advertisement
MAINTENANCE AND
SERVICING
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
WARNING
FROM ACCIDENTAL
OPERATION: Turn the Power
Switch of the Welder to its
"OFF" position and unplug
the tool from its electrical
outlet before performing any
inspection, maintenance, or
cleaning procedures.
TO PREVENT SERIOUS
INJURY FROM TOOL
FAILURE: Do not use
damaged equipment. If
abnormal noise or vibration
occurs, have the problem
corrected before further use.
1.
BEFORE EACH USE, inspect the
general condition of the Welder.
Check for loose screws, misalignment
or binding of moving parts, cracked
electrode holder head or other broken
parts, damaged electrical wiring, and
any other condition that may affect its
safe operation.
Item 61792
For technical questions, please call 1-888-866-5797.
TO PREVENT
SERIOUS INJURY
2.
PERIODICALLY, clean out the cooling
Vent and Fan with compressed air.
3.
The Ceramic Nozzle on the Tig Torch
will occasionally need to be cleaned
of spatter from welding. Clean it with
a metal brush. When the nozzle
deteriorates or can no longer be
cleaned, it will need to be replaced.
Unscrew the nozzle and replace it
with a new one.
4.
For welding quality and ability,
maintain a point on the tip.
5.
AFTER USE, clean external surfaces
of the Welder with a clean cloth.
6.
WARNING! If the Power Cord of
this Welder is damaged, it must be
replaced only by a qualified service
technician.
Page 15
Hide quick links:
Advertisement
Table of Contents
