Usb Device; Removing A Usb Device - Panasonic Toughbook CF-28 Series Reference Manual

USB Device

USB Ports
Windows 98 Windows 2000
NOTE
Windows NT USB devices are not supported.
Installing a USB Device
1
Power off your computer
Do not shut down using the standby or hibernation function.
NOTE
Before connecting a USB device, change the multimedia pocket device in
accordance with the media in which the driver of the USB device exists.
Once a screen to install a driver is displayed, the multimedia pocket device
cannot be recognized even if it is properly installed.
2
Connect the USB device to your computer
NOTE
For more detailed information, refer to the operation manual of the USB de-
vice.
You may need to install drivers compatible with the OS you are using for your
USB devices. Refer to the operation manual of the USB devices on how to
install the driver.
When a USB device is connected, there are cases the standby or hiberna-
tion function will not operate in a normal manner due to the USB device. In
addition, a USB device may have to be removed temporarily and the com-
puter restarted in cases where the computer is unable to start up properly.

Removing a USB Device

CAUTION
Do not remove the USB device while your computer is in the standby or hiberna-
tion mode.
1
Windows 2000
Double-click
vice, then select [Stop]
Follow the on-screen instructions.
(When is not displayed or when the USB device has been removed after the
computer is turned off, this step is not necessary.)
2
Remove the USB device
( "Starting Up/Shutting Down")
on the taskbar and then select the USB de-
47