Panasonic Toughbook CF-28 Series Reference Manual page 17

Standby/Hibernation Functions
Shutting Down Using the Standby or Hibernation Function
The computer should be set for either the standby or hibernation function (
Rotate the power switch; at the "beep*
(After releasing your finger from the
power switch, do not touch the power
switch until the power indicator goes off
or blinks.)
CAUTION
1
At the "beep* " sound, release your finger from the power switch. If you continue
to rotate the power switch and hold it for more than four seconds, the computer
will emit a second "beep*
lost.
Windows 98 Windows 2000
Even when [When I press the power button on my computer] is set to [Shut-
2
down]* with [Control Panel] - [Power Management]*
switch for more than four seconds and do not release it, a second "beep*
sound and the computer will power off, although the computer will not com-
pletely shut down.
* 1 When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the
Setup Utility ( page
sound.
* 2 Windows 2000 : [Power Off]
* 3 Windows 2000 : [Power Options]
NOTE
With the method below, you can shut down the computer by using the standby
function.
• Fn + F7 (
• Windows 98 Windows 2000
In [Start] - [Shut Down], select [Stand by].
• Windows NT
In [Control Panel] - [APM 2.0 for NT] - [Power Control], select [Click Here to
Suspend]. (
With the method below, you can shut down the computer by using the hiber-
nation function.
• Fn + F10 (
• Windows 2000
In [Start] - [Shut Down], select [Hibernate].
1 " sound, release your finger.
1
" then power off. Data not previously saved will be
53) or by the key combination
page 3)
page 28)
page 3)
page 16).
Standby Mode
or
Hibernation Mode
3
, if you rotate the power
1 " will
, there will be no beep
Fn + F4
17