Configuring And Using The Sos Button - Telefunken TM 110 COSI Operating Instructions Manual

By selecting Save, you save your sent messages in Sent. By selecting Do not save, you do not save your messages.
By selecting User, you will be systematically asked before sending a message if you would like to save it.
3. Use the arrow to select from the 3 options. Press

CONFIGURING AND USING THE SOS BUTTON

The emergency button is used to contact your relatives or other persons in case of an emergency.
Making an emergency call
To make an emergency call, press and hold the Emergency button on the back of your phone.
If you activated the SOS message, the SMS is sent to the emergency contacts. The phone then calls the numbers of
the Emergency contacts. If the call is not answered within 20 seconds, the phone then calls the next number, and so
on and so on.
If the SOS chain is activated, the process is repeated three times until somebody answers. To be able to use it in
case of an emergency, you should first configure it.
To access the SOS menu , scroll through the Menu, select the sub-menu Settings, then select SOS menu and
press . There are six headings in the SOS Menu:
Status
Switching the SOS BUTTON on or off. If this button is deactivated, you will not be able to use the emergency option.
1. Use the arrow to select Status. Press
deactivate
Emergency contacts
You can add up to five emergency contacts (your relatives, friends, special services, etc.). Remember to inform these
contacts that they are on your emergency list.
1. Use the arrow to select Emergency contacts. Press
2. Select the first contact and press
3. In the same way as adding a new contact in the Address book, you may choose either Add an existing contact or
enter a new number .
NOTE: By selecting Delete, you delete the registered contact and the space is empty.
4. Once you have completed your settings, press
Scroll to the next SOS contact and repeat the same procedure to add another person.
NOTE: Be careful about including numbers with an automatic voicemail on the call list as the alarm sequence stops
once the voicemail picks up.
If possible, add landline phone numbers instead of mobile phone numbers to the emergency contact list.
SOS message
The SOS message is sent to all emergency contacts when the SOS button is activated.
1. Use the arrow to select SOS Message. Press
2. Use the arrow to select Edit SMS. Press
3. Edit the help message. By default, the SOS message contains the following text: "Need your help!" ». Press
validate.
4. Use the arrow to select Status. Press
5. Use the arrow to select Activate if you would like to activate the SOS message or Stop if you do not want an SOS
message to be sent when the emergency procedure is activated. Press
15
to validate.
to validate.
activate it. Press
to validate.
to make changes.
to validate.
to validate.
to validate.
to validate
to validate.
to validate.
to