Toshiba RAS-B13GKVP-E Owner's Manual page 34

TROUBLESHOOTING (Remote Control)
Before asking for servicing or repairs, check the following points.
Symptoms
The operating mode switches.
The fan speed cannot be
changed.
Symptoms
The indicators on the display
are not shown after a short
time.
The TIMER display turns off
after a certain period of time.
Symptoms
No receiving tone is made from
the indoor unit even when the
button is pushed.
EN
The remote control does not operate correctly.
Causes
• Check whether the MODE indicated
on the display is AUTO.
AUTO
• Check whether the MODE indicated
on the display is : DRY.
: DRY
The Display Goes Off
Causes
• Check whether the timer operation is
over when the OFF TIMER is shown
on the display.
• Check whether the timer operation
has started when the ON TIMER is
shown on the display.
: ON
The Signal Receiving Tone Does Not Sound
Causes
• Check whether the infrared signal
transmitter of the remote control is
properly pointed towards the receiver
of the indoor unit when the
is pushed.
28
Description and Remedy
The fan speed and louver direction
cannot be changed in AUTO mode.
When the SWING, FIX or FAN buttons
are pressed in AUTO mode, the mode
changes to A mode.
When dry operation is selected, the air
conditioner automatically selects the
fan speed. The fan speed can be
selected during
and FAN ONLY.
Description
The air conditioner stops since the
setting time has elapsed.
When the time reaches the time
setting for the ON timer operation, the
air conditioner starts to operate
automatically and the ON timer display
turns off.
Description
Point the infrared signal transmitter of
the remote control towards the
receiver of the indoor unit, and then
button press the button repeatedly.
COOL, HEAT, A