Sharp FO-90 Operation Manual page 49

Override Ringing
Overriding the answering machine
Your callers should follow the steps below to override the answering
machine.
1
Your caller calls the FO-90 from a
tone dial telephone. When the
outgoing message begins, they should
press the "#" key on their telephone.
• The caller will hear a short beep,
and the outgoing message will stop.
2
The caller should enter the override
code and "#" by pressing the
appropriate keys on their telephone.
• If an incorrect code is entered, the
caller will hear four beeps. He or
she must re-enter the correct code
within 10 seconds or the line will
be disconnected.
3
The FO-90 will make a special
ringing sound. Pick up the handset to
answer the call.
• If you do not answer within 30
seconds, the outgoing message will
play again and the caller can then
leave a message.
48
5 5 4
(Example)