Set Clock; Switch Clock Display; Alarms; View Alarm Settings - Oregon Scientific BAR609HGA User Manual

SET CLOCK

You only need to do this if you cannot receive the
Atomic Clock signal, or you wish to adjust the
appropriate time zone.
1. Press and hold MODE for 2 seconds. The Clock
Area will blink.
2. Select the time zone, hour, minute, year, month,
day, and language. Press
setting. Press MODE to confirm.
NOTE The language options are (E) English, (F)
French, (D) German, (I) Italian, and (S) Spanish.
NOTE The time zone options are (PA) Pacific, (CE)
Central, (MO) Mountain, and (EA) Eastern.

SWITCH CLOCK DISPLAY

Press MODE to toggle between Clock with Seconds
and Clock with Weekday display.
ALARM
This product is equipped with a 2-minute crescendo
alarm.
or to change the
9

VIEW ALARM SETTINGS

Press . The alarm time and
the Clock Area.

SET ALARM

1. Press to switch to alarm display.
2. Press and hold again for 2 seconds. The alarm
settings will blink.
3. Select the hour and minute. Press
change settings. Press

ACTIVATE ALARM

Press to activate or deactivate the alarm.
shows in the Clock / Alarm Area when the alarm is
activated.

SILENCE ALARM

When the alarm time is reached, the crescendo alarm
will sound for 2 minutes. Press SNOOZE / LIGHT to
silence it for 8 minutes. Or, press
the next day.
If no button is pressed, the alarm will automatically
silence after 2 minutes. It will then sound again after
8 minutes.
status will show in
or to
to confirm.
to turn it off until