Removing Laundry Switching Off The Appliance; Sensors; Automatic Load Sensing; Unbalanced Load Detection System - Bosch WAQ283S1GB Instruction Manual And Installation Instructions

Removing laundry/switching
off the appliance
Open the washing machine door
1.
and remove the laundry.
Notes
– If you cannot open the washing
machine door, the appliance is
still locked. Wait until the
programme ends.
– If the display panel does not light
up, energy-saving mode is active.
To activate, select any button.
Set the programme selector to the
2.
Off position. The appliance is
switched off.
Turn off the tap.
3.
Not required for Aqua-Stop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the Remove any foreign objects from the Remove any foreign objects from the
■
drum and the rubber seal – risk of drum and the rubber seal – risk of drum and the rubber seal – risk of
rusting.
Leave the washing machine door Leave the washing machine door Leave the washing machine door
■
and detergent drawer open so that
any residual water can dry away.
H

Sensors

S e n s o r s

Automatic load sensing

The automatic load sensing function
adapts the water consumption ideally to
each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances detection system detects imbalances detection system detects imbalances
and ensures even distribution of the and ensures even distribution of the and ensures even distribution of the
laundry by repeatedly starting and laundry by repeatedly starting and laundry by repeatedly starting and
stopping drum spinning. stopping drum spinning. stopping drum spinning.
If the laundry is extremely unevenly If the laundry is extremely unevenly If the laundry is extremely unevenly
distributed, the speed is reduced or the distributed, the speed is reduced or the distributed, the speed is reduced or the
spin cycle is not performed for safety spin cycle is not performed for safety spin cycle is not performed for safety
reasons. reasons. reasons.
Place large and small items of
Note: Note: Note: Note:
laundry evenly in the drum. laundry evenly in the drum. laundry evenly in the drum. ~ Page 23
Sensors
en
17