Advertisement
6 REMOTE CONTROL OPERATION
!NFRARED/W)RED REMOTE CONTROL
^
^ —————————
&——————
a——
^——
Et
...........
b^
E)———
^ e '
^
r^- ^ ^
-(^ [^^t-
^
BB
<^^ r^zT-
^
^
tXP*MC
LE^tL
-Of-nc-J
M
^ 1
- ( )
^———^——^
^
^
r"!
^
——@
——c
——^
——<s
———<B
———^
0 VtDEO MODE SELECT BUTTON
Press to se!ect video source. (Video )nput-1. Video [nput-2 or RGB input)
0 POWER (LAMP) ON/OFF BUTTON
Press to turn projection tamp on or off.
0 ZOOM BUTTONS
Used to operate power zoom tens.
0 FOCUS BUTTONS
Used to operate power focus system.
0 SOUND MUTE BUTTON
Used to mute sound.
0 VOLUME BUTTONS
Used to adjust votume.
0 EXPAND BUTTON
Press to expand the center portion of the image twice. This function is canceled when the EXPAND button is
pressed again or any other function button is pressed.
0 LEVEL CONTROL BUTTONS
Used to adjust zoom, focus, colour, tint, brightness, contrast, sharpness and keystone by pressing + or - button.
0 KEYSTONE BUTTON
Used to seiect the keystone correction mode.
<B COLOUR SYSTEM SELECT BUTTON
Press to sefect .colour system. (AUTO ^ PAL-^ SECAM-^ NTSC4.43^ NTSC)
<D FUNCTION SELECT BUTTON
Used to select on-screen adjustment displays for colour, tint, brightness, contrast and sharpness.
Press repeatedfy to cycie.
<B NORMAUZATtON BUTTON
Used to reset to normal factory set picture and sound adjustment
<^ UGHT UP BUTTON
Press to tight the iifumination for function buttons on the remote contro! unit for 5 seconds, and press any other
function button during the lighting to !ight for another 5 seconds.
<B WiPtED REMOTE JACK
When using the wired remote control, connect the remote cabte to this jack.
Advertisement
