Advertisement
ADJUST THE PROJECTOR
VtDEO MODE SELECT
Press the ViDEO MODE button (located on projector or remote contro! unit) to select Video input-1, Video )nput-2 or
"RGB" tnput. The "AV1". "AV2" or "RGB" dispfay wiii appear on the screen.
AV1
j .
AV2
———^-.
RGB
COLOUR SYSTEM SELECT
Press the COLOUR SYSTEM se!ect button (boated on projector or remote contro! unit) to se!ect AUTO, PAL, SECAM.
NTSC4.43orNTSC.
Each time Cotour System select button is pressed, the cotour system changes as foiiows:
AUTO
t
^
PAL
^
SECAM
^
NTSC4.43
^
NTSC
When the colour system is set to "AUTO" position, this projector can receive coiour programs from one of the 4 systems
(PAL, SECAM, NTSC4.43 or NTSC), automatical.
!fthe picture quaiity is poor. make sure the proper cotour system is seiected to match the video source.
VOLUME ADJUSTMENT
Press )NT. SP ON/OFF button to ON(tN) position when the INTERNAL
^SOUND
mmn——
^ SOUND MUTE
mm)!--—
SPEAKER is used.
Press LEVEL buttons on the projector, or VOLUME buttons on the remote
control unit to adjust the vofume. The screen display wi!! appear.
Pressing (+) wiii increase vo!ume and the green indicator wiii increase to
the right on the screen.
Pressing ( - ) wi!i decrease volume and the green indicator wi!t decrease to
the !eft on the screen.
Press !NT. SP ON/OFF button to OFF (OUT) position, wiii disengage the
interna! speaker on the projector.
SOUND MUTE ADJUSTMENT
Pressing SOUND MUTE button on the remote contro! unit wiii mute
audio(Sound Mute display wiii appear). Press SOUND MUTE button again
to restore audio to its previous ieve!.
—12—
Advertisement
