Advertisement
3 tMPORTANT SAFETY !NSTRUCT!ONS
Read a!) of the instructions given here and retain them for
)ater use. Unptug this projector from AC power supply
before cleaning. Do not use liquid or aerosoi cteaners. Use
a damp ctoth for cteaning.
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not piace this projector on an unstable cart, stand, or
tabie. The projector may fai!, causing serious injury to a
chiid or adutt, and serious damage to the projector. Use
onty with a cart or stand recommended by the
manufacturer, or sofd with the projector. Wa!i or sheif
mounting should foitow the manufacturer's instructions,
and should use a mounting kit approved by the
manufacturer.
Do not expose this unit to rain or use near water... for
exampie, in a wet basement, near a swimming pooi or the
!!ke.
Siots and openings in the cabinet and the back or bottom
are provided for ventilation. to insure reliable operation of
the equipment and to protect it from overheating.
The openings should never be covered with cioth or other
material, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector shou!d never be ptaced near or
over a radiator or heat register.
This projector should not be piaced in a buiit-in installation
such as a bookcase unless proper ventilation is provided.
This projector shouid be operated oniy from the type of
power source indicated on the marking tabet. tfyou are not
sure of the type of power supptied, consult your authorized
distributor or iocai power company.
Do not overbad waii outiets and extension cords as this
can result in fire or eiectric shock. Do not a!iow anything to
rest on the power cord. Do not locate this projector where
the cord wiii be abused by persons walking on it.
Never push objects of any kind into this projector through
cabinet s!ots as they may touch dangerous voitage points
or short out parts that couk) result in a fire or eiectric
shock. Never spit! liquid of any kind on the projector.
Do not attempt to service this projector yourself as opening
or removj ng covers may expose you to dangerous vottage
or other hazards. Refer a!! servicing to quaiified service
personnel.
Unplug this projector from wati outtet and refer servicing to
qualified service personnel under the fotiowing conditions:
a. When the power cord or pfug is damaged or frayed.
b. !f tiquid has been spiiied into the projector.
c. tf the projector has been exposed to rain or water.
d. tf the projector does not operate normafiy by foitowing
the operating instructions. Adjust onty those controls
that are covered by the operating instructions as
improper adjustment of other controis may resutt in
damage and win often require extensive work by a
quaked technician to restore the projector to normal
operation.
e. tf the projector has been dropped or the cabinet has
been damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When repfacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may resuit in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks
to determine that the projector is in safe operating
condition.
Foiiow aii warnings and instructions marked on the
projectors.
For added protection for the projector during a lightning
storm, or when it is teft unattended and unused for tong
periods of time, unpiug it from the wat! outlet. This wi!i
prevent damage due to lightning and poweriine surges.
An apptiance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
Advertisement
