Installing The Reverse Feed Control Lever (List 2) - JUKI LU-1510N-7 Engineer's Manual

4) Installing the reverse feed control lever (List 2)

Reverse feed
control lever
1. Install reverse feed control lever spring bracket
2. Install reverse feed control lever stopper
(In case of LU-1508NH and LU-1509NH, add washer
lever with setscrew
3. Install lever return spring bracket
4. Insert the reverse feed control lever into the reverse feed control lever shaft, and install reverse feed shaft link
with push screw .
(Install so that the projection of the reverse feed shaft link enters under the reverse feed control lever.)
5. Hook lever return spring
6. Adjust the position of the reverse feed control lever.
For the adjusting procedure, refer to "(18) Position of the reverse feed control lever".
Installing parts list of reverse feed control lever (List 2)
Note No.
to the machine arm with setscrew
.)
to the machine arm.
to the lever spring bracket
Part No.
22656003
SS4120615SP
11100500
SS7112420SP
10120004
22656102
SS7120760SP
13515606
WP0502616SD
with setscrew .
to reverse feed control lever stopper
and the tension spring bracket.
Name of part
Lever spring bracket
Setscrew
Reverse feed control lever stopper
Setscrew
Lever return spring bracket
Reverse feed shaft link
Push screw
Lever return spring
Washer
– 55 –
.
and install the
Q'ty
1
1
1
1
1
1
1
1
1