How To Use The Memory Function; How To Use The Ac Adapter - Omron HEM-780 Instruction Manual

HOW TO USE THE MEMORY FUNCTION

The Blood Pressure Monitor stores up to 90 measurement values with
the date and time. When 90 sets of measurement values are stored
in the memory, the oldest record is deleted to save the most recent
measurement values.
If the date and time is not set, the measurement values will not be stored
in the memory.
1. Press the ON/OFF Button to turn the power on. Wait
for the Heart ( ) Symbol to appear on the display.
2. Press the MEMORY ( ) Button to display the most
L
recent measurement values. The time and date alternate
on the display for each measurement.
3. Press the MEMORY ( M ) Button again to display previous
measurement values.
4. Press the START/STOP button to turn the power off.
HOW TO DELETE ALL MEASUREMENT VALUES
Press and hold the START Button and MEMORY (
simultaneously for more than 2 seconds. All records will be deleted.
NOTE:
You cannot partially delete the stored records.
Press the Start Button and the
Memory ( ) Button simultaneously
for more than 2 seconds.
START
Memory (M / L)
M ) Button
14

HOW TO USE THE AC ADAPTER

Use only the authorized Omron AC Adapter, Model Number
HEM-ADPT1, with this monitor. Use of any other adapter may
cause damage to the monitor and will void the user warranty.
To connect the AC Adapter
AC Adapter Jack
1
Insert the AC Adapter Plug into the AC Adapter Jack on the back
side of the monitor as illustrated.
2
Plug the AC Adapter into a 120V AC outlet (50-60 cycles).
To disconnect the AC Adapter remove the AC Adapter from the
electrical outlet first and then remove the AC Adapter Plug
from the monitor.
NOTE:
The monitor is designed not to draw power from the batteries when
the AC Adapter is used.
To store the AC Adapter
Place the AC Adapter in the AC Adapter
storage area in the AC Adapter
storage case.
Plug
AC Adapter
15