Panasonic CS-E9BKP Service Manual page 4

CS-E9BKP CU-E9BKP5 / CS-E12BKP CU-E12BKP5
Indoor Unit
Automatic Operation Switch
• Press for < 5s to run Automatic Operation.
(Used when the remote control cannot be used.)
• Press continuously for 5s and < 8s to run
Forced Cooling Operation.
• Press continuously for 8s and < 11s to run
Forced Heating Operation.
• Press continuously for 11s and < 16s to
change different remote controlling
setting (A↔B Mode).
• Press continuously for 16s or < 21s to
switch OFF / ON Remote Control
Receiving Sound or H14 Abnormality
Detection Mode.
Operation Indication Lamps (LED)
•
POWER
MONITOR
•
POWER
• (Orange) ....... Lights up in Timer
TIMER
• (Orange) ........ Lights up in Sleep
SLEEP
•
POWERFUL
(Orange) ..... Lights up during
compressor operation.
(Green) ........ Lights up in
operation, blinks in
Automatic Operation
Mode judging and
Hot Start operation.
Setting.
Blinks in Self
Diagnosis Control.
Mode Operation.
(Orange) .. Lights up when
Powerful Mode is
selected.
Five Operation Modes
• Automatic, Heating, Cooling, Soft Dry
and Fan Operation.
Automatic and 5 Manual Indoor
Fan Speeds
Automatic and 5 Manual Vertical
Airflow Directions
Automatic and 5 Manual Horizontal
Airflow Directions
Powerful Mode
• For quick cooling or heating.
Sleep Mode
Delay ON Timer and OFF Timer
Automatic Restart Control
• Operation is restarted after power failure
at previous setting mode.
Microcomputer-controlled Room
Temperature Control
4