Sec 2. Adjustment - Sony KDL-60R510A Service Manual

SEC 2. ADJUSTMENT

HOW TO ENTERING SERVICE MODE
1) Turn on the main power switch to place this set in power on mode.
2) Press the buttons on the remote commander as follows, and entering service mode.
<LEFT>,<RIGHT>,<MUTE>,<+>,<MUTE>,<VOL+>
3) Service mode display.
Sound Adjust...
Wide Band Tuning
Range Scan...
Self diagnosis history
Status Information
LVDS Spectrum (%o)
Low of HPD
TVD_MCDONE_CNT
Demo Special
Panel Selection
UART Selection
SERIAL NUMBER EDID
MODEL NAME EDID
- When replace Main Board or panel, please confirm "Panel Selection" and "MODEL NAME EDID" in service mode.
If they are different, please select a suitable thing.
- Change of SERIAL NUMBER EDID and MODEL NAME EDID are possible only once when they are white character.
Note: About the software data update, please refer to "APPENDIX-2".
KDL-60R510A(CN8, UC2, LA1)
Service Mode
>>
>>
>>
>>
>>
<[ 25
<[ 5
<[ 20
>>
<[ 46_JE600D3LC7N_US ]>
<[ Usb Fact
0027R2L
KDL-60R510A
[</>]Set[Home]Exit
]>
Panel Selection
]>
]>
46_JE600D3LC7N_US
47_JE600D3LC7N_CHD
]>
MODEL
MARK
NAME EDID
KDL-60R510A For UC2 / LA1
KDL-60R510A For CN8
16