Initial Settings; Set Automatic Recording; Set The Date And Time - HP f500g User Manual

2.5 Initial Settings

Before using the device, we recommend you to enable the Automatic Record
function and set up the correct date and time.

2.5.1 Set Automatic Recording

To enable the recording to start automatically after you turn on the
power, do the following:
Press the
1.
menu.
Press the
2.
Automatic Record and press the
button.
Press the
3.
Press the
4.

2.5.2 Set the Date and Time

To set the correct date and time, do the following:
Press the
1.
Press the
2.
/ Time and press the
Press the
3.
value and press the
move to another field.
Repeat step 3 until the date and time setting is complete.
4.
Note:
1. When the battery is drained dry and the satellite synchronization is off , the user must reset the
date/time before the function -automatic record is started. If the user doesn't reset the date/time, the
device will give you alert after one minutes and the automatic record will be started .
2. But if the satellite synchronized ,the device can do automatic record immediately.
button to enter the OSD
/ button to select
/ button to select On and press the
button to exit the menu.
button to enter the OSD menu.
/ button to select Date
button.
/ button to adjust the
button to
button.
13