Cardo Systems PACKTALK User Manual page 21

INTERCOM WITH CHANNELS "A" AND "B"
5.2b
Start multi-party conversations using Intercom Channels "A" and "B". This mode is
suitable for 2, 3 or 4-way calls.
PAIRING INTERCOM CHANNELS "A" AND "B"
Pairing a channel will replace any existing paired device on that Channel with the
newly paired device.
If you have purchased the PACKTALK DUO, both units are factory-paired and configured
to communicate via Channel "A". If for any reason you have to pair them again, OR if you
wish to pair a different unit to make Intercom calls, proceed as follows:
There are three ways to pair Intercom (IC) Channels "A" and "B":
g
OPTION 1: Via the Cardo SmartSet App
Â
OPTION 2: Advanced Features Menu
1. Make sure your unit is in Bluetooth Intercom mode and in Standby.
2. Double-tap Z
3. Select either "Pair Intercom Channel A" or "Pair Interom Channel B".
☛
OPTION 3: Manual Pairing
1. Check that all units are in Standby.
2. To pair IC Channel A – press
To pair IC Channel B – press
Then double-tap
3. Enter IC Pairing mode on the second unit following its user manual. Both units
will now be in Intercom Pairing mode.
4. After a few seconds, both units will show a solid LED for 2 seconds, indicating
that they are paired and ready to use.
5. If Pairing is not completed within 2 minutes, the units will return to Standby.
|
20
and choose the Advanced Features Menu (see 3.3).
v for 5 sec. until the RED LED begins flashing rapidly.
v for 5 sec. until the RED LED begins flashing rapidly.
v . A flashing BLUE LED indicates Channel "B" pairing mode.