Dmc Intercom Mode - Cardo Systems PACKTALK User Manual

5.1 DMC INTERCOM MODE

The default intercom mode is Bluetooth Intercom. To switch to DMC intercom mode:
• Use the Cardo SmartSet App (see section 3.2)
• or enter the Standby menu and choose 'Switch Intercom mode'
• or in Standby mode, tap
Introduction
The scala rider PACKTALK uses DMC technology to create a spontaneous and fluid
virtual network of riders. DMC provides a more stable connection in a group of riders
than the Bluetooth intercom mode.
In DMC intercom mode, each rider acts as an autonomous hub that maintains
simultaneous and independent communication links with each of the other members
in the pack, operating in a mesh network.
Members may join, leave and rejoin the pack conversation without compromising the
integrity of the ongoing multi-point conference call among the other pack members.
Whenever a PACKTALK user cannot directly connect with pack members beyond
his intercom reach, it will re-adjust within split seconds and re-connect to the most
suitable other pack member in order to 'leapfrog' to the remote member.
Create a new Pack
The easiest way to create a new pack is via the Cardo SmartSet App, or from the
Advanced Features Menu in Standby mode.
Alternatively, in DMC mode, press
the LED is flashing, tap
proceed to search for pack members in DMC grouping mode and automatically add
them to your pack. If no units are found within 2 minutes, your unit will return to
Standby mode.
Pairing with a SMARTPACK unit will limit the size of your group to 4 riders.
A pack can only have one "Pack Creator". The pack can still continue to function even if the
Pack Creator is no longer available.
|
14
v p
and simultaneously
v for 5 seconds to enter DMC grouping mode. While
v
to define yourself as the "Pack Creator". Your unit will then