Citizen J250 Instruction Manual page 53

• Make sure that the
watch is not wet
before operating
the crown or any
buttons.
• To unscrew/screw
the crown/button,
see page 11.
1
Check the power reserve indication.
• Charge if the power reserve level is lower than "2".
2
Pull the crown out to position .
The water depth hand and maximum water depth
hand move to their current reference positions. Do not
execute any operation until all the hands stop.
3
Press and hold both the upper left button
and lower left button
seconds or more.
As you release the buttons, the hands move slightly to
indicate that reset is completed.
Correct the reference position (page 41) and adjust
the time (page 34) and calendar (page 35).
Troubleshooting
at the same time for 4
51