Citizen J250 Instruction Manual page 28

Water depth measurement
Finishing measurement
To finish water depth measurement, press and hold the upper left button
seconds or more after taking the watch out of water and wiping water away from
the water sensor and other parts of the watch.
• Water depth measurement will automatically finish when water depth is kept at 0
m for about 10 minutes.
• Water depth measurement finishes in a few seconds after wiping water away from
the water sensor when the water depth hand does not move at all (water depth
is always shallower than 1 m and the power reserve indication hand points to
"READY").
26
for 5