Citizen J250 Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:
• Click in articles to see video instructions of operation.
Video

Component identification

• During daily use
Hour hand
Button
A
Power reserve
indication hand
Water pressure sensor
Button
B
Second hand
• During water depth measurement
Hour hand
Button
A
Power reserve indication
hand
Water pressure sensor
Button
B
Second hand
• Actual appearance may differ from the illustrations.
• The crown has two positions when pulling it out.
• Rotate the screw down crown counterclockwise until it
releases from the case before operating it.
• After operation, with pressing it to the case, rotate the
crown clockwise to tighten it firmly.
• Refer also to our web page for detail of usage of the
scale and bezel on the watch.
(http://www.citizenwatch-global.com/support/pdf/enhanced/e.pdf)
J250 Abbreviated instruction
Minute hand
5 0
Date indication
7
E
Crown
Maximum water depth
hand
Minute hand
5 0
Date indication
7 Water sensor
E
Crown
Water depth hand
Rotating bezel
Crown's position
0 1 2
J250 instruction manual

Checking the power reserve

• The power reserve is not indicated when the power reserve indication hand
points "READY".
• You cannot use measurement functions while the power reserve level is in "0".
However, you can see the current time. Frequent use of measurement functions
makes power duration shorter.
3
Level
Indication
E
Duration
340 ‒ 300 days
(approx.)
Meaning OK for normal use.

Setting the time

1.
Pull the crown out to position
0 second.
2.
Rotate the crown to set the time.
• Take care the time set is AM or PM.
• Date indication starts to change to the next as the setting passes 10PM.
Rotating the crown counterclockwise does not turn back date indication.
3.
Push the crown in to position
time source to finish the procedure.

Setting the date indication

• Do not adjust the date indication while the watch shows 10:00 PM ‒ 0:00 AM.
Otherwise, the date indication may change incorrectly thereafter.
• Date indication adjustment is required on the first days of March, May, July,
October and December.
1.
Pull the crown out to position
2.
Rotate the crown clockwise to set the date indication.
3.
Push the crown in to position
2 1
E E
300 ‒ 200 days 200 ‒ 4 days 4 days or shorter
Power reserve is Insufficient
getting low. charge
Charge immediately.
when the second hand points
2
in accordance with a reliable
0
.
1
to finish the procedure.
0
0
E
1/3