How To Install The Software - Fujitsu ScanSnap S1100i Basic Operation Manual

How to Install the Software

When you insert the Setup DVD-ROM into the DVD-ROM drive on your computer, the [ScanSnap]
window appears.
ATTENTION
l Do not connect the ScanSnap to the computer before installing the software. Doing so may cause
the ScanSnap not to be recognized by the computer. In that case, install the software, and then
reconnect the ScanSnap to the computer.
l If a DVD-ROM drive is not available, the installers for the software programs can be downloaded
from the following web page.
http://scansnap.fujitsu.com/g-support/en/
The functions of each button in the [ScanSnap] window are as follows.
Icon
ScanSnap
Other Software
Readme
Manuals
Function
Starts installing software.
Displays the [Other Software] window. From this window, you can access the
download web pages of the software programs.
Displays the Readme file.
The [Manuals] window appears. You can refer to Safety Precautions, Getting Started,
the Basic Operation Guide (this manual), and the Advanced Operation Guide.
37
How to Install the Software