Motorola XU2100 User Manual page 34

XSeries Programming Quick Reference
Radio On Visual
*Available
Channels
=
6
Call Tone
E
Microphone
Gain
?
*Scan List
Y
*depending upon model
XSeries Programming Quick Reference
Function
Press & hold M Qfor 3 sec. and turn on radio.
*Channel
Frequency
Interference
Eliminator
Code
*Scramble
Code
Bandwidth
\as needed, then [or ]
Press \ until = displays.
Press [ or ] to select number of
available channels.
Choose1, 2, 3, or
0 = Off (default).
Choose:
1 Low Sensitivity
2 Medium Sensitivity
3 High Sensitivity
Press [ or ] to select channel,
then choose Y (yes) to include or
n (no) to exclude by pressing J .
Appearance
Use [or ] for1 through 6.
2
Press \ until
change, press [or ].
*depending upon model
*
depending upon model
Appears after
for each channel.
Press \ until e displays. Must
be set to same code for all radios.
e
1
Press \ until K displays. Press
[ or ] to select D (25.0 kHz)
or C (12.5 kHz).
C
K
Note: If bandwidth is not flashing,
it is not selectable on the
chosen frequency.
displays.
k
displays. To
l
shows. Set
l