Commax CDV-70A User Manual page 5

● Priority talk - PTT (
conversation from the door camera, pressing and holding the "PTT" button will deliver
only the voice of the speaker from the CDV-70A,70AM to the door camera unit to help
clarify speech.
● Adjustment of image resolution
To adjust brightness or color resolution, use the buttons on the right side.
Press "MENU" button to enter "control menu " in taking with a door camera unit or
monitoring status and then push the "SELECT" button.
Scroll the proper menu you want to change by using "UP/DOWN" button.
And then push "select" button to enter into "changing mode".
Press " UP/DOWN" button to change into proper level
Press "SELECT" button to save the new one and it return "basic menu"
automatically. Adjust each menu as per same way.
● To adjust the ratio of monitor image size, select the "Disp. Ratio"
menu and press "SELECT" button.
Press the "UP/DOWN" button to change the ratio of monitor image size.
* Please "Reset" menu to make default of all.
"menu" button shall be pressed to return standby mode from "basic menu" after
setting proper level .
Note : "MENU" Button – Enter or Close adjustment mode
"SELECT" button – Select sub - menu or move previous menu
"UP/DOWN" button – Scroll the menu or change the value
6
) When there is impeding noise that disturbs
NOTE : Following function of "Recording visitors' image & setup" is available for
CDV- 70AM only. For CDV-70A, it is not available one.
3-1. Recording visitors' image
Press and hold the "monitoring" button (REC) for 1 second under "talk" or "monitor"
mode to save a cut of image with electric sound.
3-2 . Review recorded images and its setup
Press and hold the "PTT" button for 2 seconds under stand-by mode, the menu is shown
as follows.
Menu
Review
Delete All Images
Auto Record Setting
Time Setting
Main menu
This above picture is main menu, it shall be able to set up each subject.
Description of the above pictures.
A parts : Operation button
B Part : Sub Menu
Note : EXIT – Escape UP/DN – Up & down SEL – Select
3-2-1 Review recorded images and its setting.
Press "review" button to see recorded images .
Operation button is same as right side as following picture.
B
A
Exit
SEL
UP
DN
7