External Monitor - Toshiba L9W-B User Manual

Problem
USB device does not
work
Sound system
In addition to the information in this section, also refer to the documentation
supplied with your audio device.
Problem
No sound is heard
Annoying sound is
heard

External monitor

Also refer to
your monitor for further information.
User's Manual
Procedure
Remove the USB device from the computer and
then reconnect it to a free port to ensure that it is
firmly attached.
Ensure that any required USB device drivers are
properly installed. To achieve this, you should refer
to both the device documentation and the
operating system documentation.
Procedure
Press the shortcut keys to increase or decrease
volume.
Check the software volume settings.
Check to see if Mute is turned to Off
Check to make sure that the headphone
connection is secure.
Check within the Windows Device Manager
application to ensure that the sound device is
enabled and that the device is properly working.
In this instance, you might be experiencing
feedback from either the internal microphone or an
external microphone connected to the computer.
Refer to
information.
Volume cannot be adjusted during Windows start
up or shut down.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Operating Basics, and to the documentation supplied with
Sound System and Video mode for further
6-10