Table of Contents
Advertisement
Problem
Battery does not
power the computer
as long as expected
Real-Time Clock
Problem
The BIOS setting
and system date/
time are lost.
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer. Refer to the
Problem
Output to screen is
garbled
Internal display panel
Apparent problems of the computer's display panel might be related to
setup and configuration of the computer.
User's Manual
Procedure
If you frequently recharge a partially charged
battery, the battery might not charge to its full
potential. In these instances, you should fully
discharge the battery and then attempt to charge it
again.
Check the Power saver option under Choose or
customize a power plan in the Power Options.
Procedure
The charge of the Real-Time Clock (RTC) has run
out. You must set the date and time in the
TOSHIBA Setup Utility by using the following
steps:
1.
Launch the TOSHIBA Setup Utility.
Refer to the
TOSHIBA Setup Utility
further information.
2.
Set the date in the System Date field.
3.
Set the time in the System Time field.
4.
Follow the on-screen instructions to proceed.
The Keyboard
section for further information.
Procedure
Refer to your software documentation to ensure
that it is not remapping the keyboard in any way
(remapping involves changing or reassigning the
function of each key).
If you are still unable to use the keyboard, you
should contact TOSHIBA Support.
section for
6-6
Advertisement
Table of Contents
