To Replace The Mains Plug; Calling For A Service - Sharp R-28STM Operation Manual

Hide thumbs Also See for R-28STM:
Table of Contents

Advertisement

The wires in the mains cable are colour coded as
shown:
Green and yellow stripes = EARTH
Blue
Brown
As the colours in the mains lead of your oven may not
correspond with the coloured marking identifying the
terminals in your plug, connect the wires as described:
• The green and yellow wire to the plug terminal
marked E or
or coloured green or coloured
green and yellow.
• The blue wire to the plug terminal marked N or
coloured black or coloured blue.
• The brown wire to the plug terminal marked L or
coloured red or coloured brown.
Make sure the terminal screws are tight and the cable
is held securely by the cable grip where it enters the
plug.
Like most appliances in your home, your oven must be
connected to a single phase 230-240V, 50Hz alternating
current supply.
If you do not make the proper electrical connections
you might damage the oven or injure yourself. Neither
SHARP nor the supplier will be liable if this happens.
WARNING: THIS APPLIANCE MUST BE EARTHED
If you have any doubts about your electrical
supply ask a qualifi ed electrician.
• If you are unable to resolve a problem using the
checks covered on the last few pages, do not
attempt to service this microwave oven yourself.
• Contact the dealer or supplier from whom the oven
was purchased in order to obtain service. Where this
is not possible, please contact the SHARP Customer
Information Centre. Telephone: 0845 888 8112 (offi ce
hours).

TO REPLACE THE MAINS PLUG

= NEUTRAL
= LIVE
IMPORTANT!
• The fuse from the cut-off plug should be removed
and the plug disposed of in a safe manner.
• Under no circumstances should the cut-off plug
be inserted into a socket outlet as a serious electric
shock may occur.
• The plug must not be used without the fuse cover
fi tted.
If you have any doubt about your microwave oven
obtain the help of a qualified electrician. When
replacing the plug please ensure that you use a BSI or
ASTA approved plug to BS1363, this should be fi tted
with a brown coloured 13 amp fuse approved by
BSI or ASTA to BSI 362. If you have any doubt about
electrical connection seek the help of a qualified
electrician.
CALLING FOR SERVICE
• For general information and assistance with oven
queries, please contact our
Customer Information Centre:
U.K.: 0845 888 8112 (offi ce hours)
Ireland: 01 676 0648 (offi ce hours)
Website: www.sharp.co.uk/customersupport
• Replacement accessories may be obtained from our
main parts distributor:
Wizard Distributors
Telephone: 0161 428 3263
GB-17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents