Table of Contents
Advertisement
•
Turn off the radio (see page 13) or place the NiMH battery in the charger
adapter cover.
•
Plug in the charger.
•
At the contacts on the back of the radio, or if charging just the battery, at the
battery contacts:
•
Position the charger with the hook on the LED end of the charger placed over
the larger slot.
•
Snap the hook on the cord end into the smaller slot.
Note: If you notice the LED flashing red for more than a minute while clamping
the charger onto the charger adapter cover, the battery is faulty and must
be replaced.
•
When the LED turns solid green, the battery is fully charged.
Note: When charging the battery by itself, remove the charger from the charger
adapter cover before removing the battery.
6
Hide quick links:
Advertisement
Table of Contents
