Dishwasher Features - KitchenAid KDTM354E User Instructions

4. Press CANCEL/DRAIN and wait approximately 2 minutes until
the machine drains and the Cancel/Drain light turns off.
5. Select new cycles and options.
6. Press START/RESUME.
Adding a Dish After Dishwasher Is Started
If your dishwasher has an "Add Dish" indicator:
1. Open the door slightly to stop the cycle. Wait for the spraying
action to stop and then completely open the door.
2. Add a dish to the load while the indicator is lit.
3. Press the START/RESUME button and close the door. If the
door is not closed before the countdown timer ends you will
hear a series of beeps and the dishwasher will not start.
ProScrub Option Wash Area
®
The ProScrub ® option wash area is located at the back of the lower
level rack and the front corners of the upper level rack.
A
A. Back of dishwasher
NOTE: You must select the ProScrub
some models) option to use these features. Make sure items do
not interfere with the water feed tube, spray arms, or the lower
®
rack ProScrub spray jets.
Keep the last tine row in the back of the lower rack in the
60° angled position when using the ProScrub
In the back of the lower rack, load pans, casserole dishes,
etc. with the soiled surfaces facing the ProScrub
and resting on the last row of tines in the angled position.
Only one row of items may face the ProScrub
Stacking, overlapping or nesting items will keep the
®
ProScrub spray jets from contacting all of the surfaces.
When using ProScrub ® Upper place tall or oddly shaped
glasses or bottles in the front corners of the upper rack face
down. It is best to load these items in between rows of tines.
Silverware Basket
Silverware basket lids:
Use silverware basket lids to provide optimal spacing and best
cleaning performance.
NOTE: If your silverware does not fit into the designated slots,
push tabs inward on either end and lift lid off of the silverware
baskets. Mix silverware types to keep them separated. Load
knives down, forks up, and alternate spoons for best cleaning
results.

Dishwasher Features

Your KitchenAid ® dishwasher may have some or all of these features.
® or ProScrub ® Upper (on
®
option.
® spray jets
® spray jets.
If your dishwasher does not have "Add Dish" indicator:
1. Open the door slightly to stop the cycle. Wait for the spraying
action to stop and then completely open the door.
2. If the detergent dispenser door is closed you may add a dish. If
the detergent dispenser door is already opened an added dish
might not be cleaned.
3. Press the START/RESUME button and close the door. If the
door is not closed before the countdown timer ends you will
hear a series of beeps and the dishwasher will not start.
Easy To Remove Third Level Rack (on some models)
If additional space is needed
in the upper rack, the third
level rack can easily be
removed.
To remove, fully extend rack until it stops. Then, open the track
stops on each side and lift to remove.
Low profile items
such as serving
utensils and
silverware may be
loaded on the third
level rack.
®
SURE-HOLD Cup and Stemware Holder
Fold down the extra shelf on the left-hand or right-hand side of the
upper level rack to hold additional cups, stemware or long items
such as utensils and spatulas.
A.Track stop B.Track
13