Technics RS-DV290EG Service Manual page 14

cassette holder. Refer to
3. Insert a metal tape into the Deck 2 with an intact erasure
prevention tab on the right side.
4. Close the Deck 2 cassette holder.
5. Press the Fast forward button. Refer to
forwards for about 2 seconds then stops.)
6. Open the Deck 2 cassette holder and turn over the metal tape.
(intact erasure prevention tab on the left side.)
7. Close the Deck 2 cassette holder.
8. Press the Rewind button. Refer to
about 2 seconds then stops.)
9. Open the Deck 2 cassette holder and replace the metal tape with a
CrO2 tape.
10. Close the Deck 2 cassette holder.
11. Press the PLAY button. Refer to
and check, the tape stops.)
12. Open the Deck 2 cassette holder and replace the CrO2 tape with a
normal tape.
13. Close the Deck 2 cassette holder.
14. Press the Record pause button. Refer to
operation.)
15. Press the STOP button. Refer to
code is displayed. Refer to Table 5-1. Each time the STOP button is
pressed, the fault items are displayed in sequence.
Fig. 5-3.
Fig. 5-3.
Fig. 5-3.
Fig. 5-3.
Fig. 5-3.
14
Fig. 5-3. / (Tape fast
/ (Tape rewinds for
/ (After TPS operation
Fig. 5-3. / (No record
A mechanism error