Sony MHC-VX888 Operating Instructions Manual page 8

Hooking up the system (continued)
Note
Keep the speaker cords away from the antennas to
prevent noise.
5 Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
Jack type A
AM loop antenna
Jack type B
AM loop antenna
6 Connect the video input jack of your TV
to the VIDEO OUT jack using the
supplied cable.
Tip
For even higher quality video images, you can use an
optional S. Video cable to connect the S. VIDEO
input jack on your TV to the S. VIDEO OUT jack.
S. VIDEO is available for Video CD output only.
8
03GET_MHC-VX888.p65 GB
Extend the FM lead
antenna horizontally.
Extend the FM lead
antenna horizontally.
S V ID E O
O U T
A U D IO O
U T
V ID E O
O U T
8
7 For models with a voltage selector, set
VOLTAGE SELECTOR to the position of
your local power line voltage.
Set the same voltage range for the sound
broad amplifier and main unit.
220V 230-
120V
240V
Main Unit
8 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with the
adaptor).
9 Set the color system according to your
TV while the power is off.
The color system Do this
of your TV
NTSC Press ?/1 while holding down
GAME EQ. The color system is
set to NTSC.
PAL Press ?/1 while holding down
MUSIC EQ. The color system is
set to PAL.
AUTO* Press ?/1 while holding down
MOVIE EQ. The color system is
set to AUTO.
* When your TV automatically changes the color
system according to the input signal.
Tip
Color system is available for Video CD output only.
3/13/01, 5:23 PM
MHC-VX888 4-232-653-11 (1)
230 - 240V
120V 220V
Sound Broad
Amplifier