Advertisement
Congratulations on choosing your Mako 6500 appliance. Your appliance may also be referred to as
the Customer Premise Equipment (CPE) or simply Mako.
Your Mako is managed remotely by Mako Networks via a web server, using your standard broadband
Internet connection and the Mako Networks Central Management System (CMS).
The
CMS
uses a standard web browser interface for personal configuration and reporting, providing
enterprise level control over your connection; giving you freedom to manage and monitor your
business network over any Internet connection, anywhere. Refer to the appendix, Overview, for a
general overview of your new device.
This handbook provides a guideline for using the Mako 6500 appliance in a standard
configuration environment.
The intended audience for the guide is the actual end user of the Mako System, you.
Note: For the remainder of this user guide, the Mako 6500 appliance will be referred to as the Mako and
the Mako Networks Central Management System as the CMS. Any personal device using the Internet to
connect to the CMS will be simply referred to as a PC regardless of type.
It also needs to be noted that the
complemented with the Mako CMS configuration and reporting user guides. Your Mako and CMS
are referred to as the Mako System, see Figure 1, below for additional information on the Mako
System, visit http://www.makonetworks.com/sys.html.
Mako 6500-A2 and A2/3G Product Handbook v.1.2
CMS
is integral to the Mako and this user guide should be
Page 4 of 24
Advertisement
