D-Link DCS-942L User Manual page 24

Section 4 - Configuration
If you are required to connect using PPPoE, select Enabled and
enter the Username and Password for your PPPoE connection.
A Dynamic DNS account allows you to access your camera over
the Internet when you have an IP address that changes each
time you connect to the Internet. If you have a Dynamic DNS
account, click Enable and enter the following details:
Server Address:
(Dynamic Domain Name Server) will hold a DNS
host name and synchronize the public IP address
of the modem when it has been modified. The
username and password are required when
using the DDNS service.
DDNS:
Click to enable the DDNS function.
Server Address:
Select your Dynamic DNS Server from the pull
down menu.
Host Name:
Enter the host name of the DDNS server.
User Name:
Enter your username or e-mail address used to connect to the DDNS.
Password:
Enter your password used to connect to the DDNS server.
Timeout:
You can setup how often the camera notifies the DDNS server of its current global IP address by entering a whole number in hours.
Click Next to continue.
D-Link DCS-942L User Manual 24