Flat Panel Display Brightness (8-Pin Lcd_Blkt_Panel) - Asus N3150I-C User Manual

10. Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1/2)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drive or optical drive via
Serial ATA 6.0 Gb/s signal cables.
N3150I-C / N3050I-C SATA 6.0Gb/s connectors
•
•
11.

Flat panel display brightness (8-pin LCD_BLKT_PANEL)

This connector is for the LCD panel brightness controls.
N3150I-C / N3050I-C Flat panel display brightness
12. Display panel power connector (2-pin PANEL_SW)
This connector is used for the display panel power switch.
N3150I-C / N3050I-C Display panel power connector
1-16
SATA6G_2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
To configure the default SATA type in BIOS, click Advanced Mode > Advanced tab >
SATA Configuration > SATA Mode.
When using hot-plug and NCQ, set the SATA Mode item in the BIOS to [AHCI]. See
section 2.5.4 SATA Configuration for details.
LCD_BLKT_PANEL
PANEL_SW
PIN 1
PIN 1
GND
MON_SW#
Chapter 1: Product introduction