Atx Power Connectors (24-Pin Eatxpwr, 4-Pin Atx12V) - Asus N3150I-C User Manual

4.

ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
N3150I-C / N3050I-C ATX power connectors
• For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
• DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will
not boot up.
• We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
• If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
5. TPM connector (14-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which can securely
store keys, digital certificates, passwords and data. A TPM system also helps enhance
network security, protects digital identities, and ensures platform integrity.
N3150I-C / N3050I-C TPM connector
The TPM module is purchased separately.
ASUS N3150I-C / N3050I-C
ATX12V EATXPWR
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
PIN 1
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
TPM
PIN 1
+3V
F_LAD0
+3V
F_LAD1
C_PCICLK_TPM
F_LAD2
GND
F_LAD3
F_FRAME#
S_PCIRST#_TBD
F_SERIRQ
+3VSB
F_CLKRUN
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
1-13