Functional Description - Bosch GST Professional 85 PB Original Operating Instructions

OBJ_BUCH-689-001.book Page 8 Thursday, April 24, 2008 3:03 PM
8 | English
Hold the power tool only by the insulated
gripping surfaces when performing an oper-
ation where the cutting tool may contact
hidden wiring or its own power cord. Contact
with a "live" wire will also make exposed
metal parts of the power tool "live" and shock
the operator.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Keep your workplace clean. Blends of ma-
terials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the power tool has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Do not use the power tool with a damaged
cord. Do not touch the damaged cord and
pull the plug from the outlet when the cord
is damaged while working. Damaged cords
increase the risk of an electric shock.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the tool and leave it open.
Intended Use
The power tool is intended for making separating
cuts and cut-outs in wood, plastic, metal, ce-
ramic plates and rubber while resting firmly on
the workpiece. It is suitable for straight and
curved cuts with miter angles to 45°. The saw
blade recommendations are to be observed.
1 609 929 N43 | (24.4.08)
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Rotating handle (SDS system)
2 Dial control for stroke rate preselection
(GST 85 PBE)
3 On/Off switch
4 Lock-on button for On/Off switch
5 Handle
6 Hex key
7 Switch for sawdust blowing device
8 Adjusting lever for orbital action
9 Base plate
10 Guide roller
11 Saw blade*
12 Contact protector
13 Stroke rod
14 Splinter guard*
15 Scale for miter angle
16 Screw
17 Positioning pin/mark
18 Bolt hole
19 Lead for the parallel guide
20 Locking screw for parallel guide*
21 Parallel guide with circle cutter*
22 Centering tip of the parallel guide*
*The accessories illustrated or described are not
included as standard delivery.
Bosch Power Tools