To Charge Battery With Charger Adapter; To Charge Battery With 10 Hour Desktop Charger (Optional) - Motorola M-Series Owner's Manual

To Charge Battery With
Charger Adapter
1. Turn the radio off.
2. Lift accessory cover and plug the Charger
Adapter firmly into the small jack (lower
hole). Fig. G
3. Plug the charger into an electric outlet. The
light on the charger will glow continuously
if charging properly.
4. Allow 10 hours for the battery to fully
charge.
Notes:
• For optimum battery life, the battery
should not be left charging for prolonged
periods after reaching full charge. Charg-
ing the battery over the weekend is
acceptable.
• Do not transmit while radio is charging.
Transmitting while radio is charging can
cause the radio transmitter or the charger
to operate improperly.
• Turn radio off when charging. If radio is
on while charging, at least twice as much
time is required to charge the battery.
FIG. G
To Charge Battery With
10 Hour Desktop Charger
Note: The Desktop Charger is optional and
may not be included in your package.
1. Connect Desktop Charger and Charger
Adapter. Fig. H
2. Charge the battery while inside the radio by
placing the radio in the Desktop Charger
with radio facing towards you.
You can also charge the battery by remov-
ing battery from radio and placing it in
Desktop Charger. Silver contacts must
face down and arrow points toward front
of charger. Fig. H
3. The light on top of the Desktop Charger will
glow continuously when radio / battery is
inserted. If light does not come on, check
radio / battery is properly inserted and
check battery/ charger contacts to be sure
they are clean. The light will continue to
glow until the radio / battery is removed
from Desktop Charger.
4. Allow 10 hours for the battery to fully
charge.
FIG. H
7