Skoda 2014 Rapid Owner's Manual page 31

Reset counter for distance travelled (trip)
›
Press and hold the » Fig. 19
6
Odometer
The odometer indicates the total distance which the vehicle has been driven.
Note
If the second speed display is enabled on vehicles with a segment display, this
speed will be shown instead of the odometer.

Read and observe on page 26 first.
Use buttons and to set the clock
5 6
The choice to change the display (hours or minutes).
5
The change of the displayed value.
6
In vehicles equipped with the MAXI DOT display, it is also possible to set the
Time in the Time menu » page 42.
Display of the second speed

Read and observe on page 26 first.
The display can show the current speed in mph
This feature is provided for driving in countries with different speed units.
MAXI DOT display.
The display of the second speed can be set in the Alt. speed dis. menu
item » page 42, Settings.
Segment display
›
Press the » Fig. 19 on page 26 key repeatedly until the odometer display
5
flashes » page 28.
›
Press the key while the display flashes.
6
The second speed is displayed instead of the odometer.
The display of the second speed can be disabled in the same way.
1)
For models with the speedometer in mph, the second speed is displayed in km/h.
on page 26 button.
» Fig. 19 on page 26.
.
1)
Auto Check Control

Read and observe on page 26 first.
Vehicle condition
Certain functions and vehicle systems are checked continuously when the igni-
tion is switched on.
Some error messages and other information are displayed in the MAXI DOT
display. The messages are displayed simultaneously with the icons in the MAXI
DOT display or with the warning lights in the instrument cluster
Indicator lights.
The menu item Vehicle status is shown in the main menu of the MAXI DOT
display whenever at least one fault message exists. After selecting this menu,
the first of the error messages is displayed.
If there are several error messages, the display will show 1/3, for example, be-
low the message. This indicates that the first of a total of three error messag-
es is being displayed.
Warning symbols in the MAXI DOT display

Engine oil pressure too low
Check engine oil level,

engine oil sensor defective

Problem with the engine oil pressure
Clutches of the automatic gearbox DSG are

too hot
Problem with the engine oil pressure

If the symbol is shown in the MAXI DOT display, you must have your vehicle

checked immediately by a specialist garage. The information about the maxi-
mum permissible engine speed is displayed together with this symbol.
Clutches of the automatic DSG gearbox are too hot

A symbol in the MAXI DOT display indicates that the temperature of the au-

tomatic gearbox DSG clutches is too high.
» page
» page 31
» page 31
» page 29
» page 29
Instruments and Indicator Lights
30,

29