Deleting A Nuisance Channel; Restoring A Channel To The Scan List - Motorola CP200 User Manual

DELETING A NUISANCE CHANNEL

Note: Your dealer must preprogram a button
If a channel continually generates unwanted
calls or noise (a "nuisance" channel), you can
temporarily remove it from the scan list:
1 While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
2 Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note:
32
English
to Nuisance Delete (see page 14) to
access this feature.
You cannot temporarily delete the
channel that has been prepro-
grammed as your designated scan
channel, a priority channel, or the
last remaining channel in the scan
list.

Restoring a Channel to the Scan List

1 Power off the radio. Once the radio is powered
on again, the deleted nuisance channels are
restored to the scan list.
or
– –
1 Press the preprogrammed Scan button to stop
the scan.
2 Press the preprogrammed Scan button again
to start scanning again. The Deleted Nuisance
Channels are restored to the scan list.
or
– –
1 Select a different channel. Once you return to
the original channel, the deleted nuisance
channels are restored to the scan list.