Adding A Deleted Nuisance Channel Back To The Scan List; Scan Channel Discovery Alert; Scan List Member Priority - Motorola EX500 Expert Series User Manual

ADDING A DELETED NUISANCE
CHANNEL BACK TO THE SCAN
LIST
Press the Scan button (
1
the scan operation.
Press the Scan button again to re-start the
2
scan operation.
SCAN CHANNEL DISCOVERY
ALERT
Sometimes you need to know which channel
the radio has switched to during a scan
operation. The Scan Channel Discovery Alert
gives you this information.
After you have stopped a scan operation, this
feature gives you audio feedback when you
select the last channel that was switched to by
the scan operation.
To do this:
Stop the scan operation.
1
Turn the Channel Selector knob (see page
2
15) to change the channels.
24
English
3

SCAN LIST MEMBER PRIORITY

see page 17
) to stop
A channel in your scan list may be prioritized
(check with your dealer for details). In such a
case, the radio will check that prioritized
channel more frequently than the other non-
prioritized channels.
Assuming a scan list with 6 channels, if all your
channels are non-prioritized, the normal scan
operation would check for activity in the
following sequence:
When you reach the last channel the scan
operation switched to, the radio sounds an
alert tone.