Talkback; Deleting A Nuisance Channel; Adding A Deleted Nuisance Channel Back To The Scan List; Prioritization Of A Scan List Member - Motorola P080 User Manual

TALKBACK

If the programmable Talkback option is set, you can
respond to any calls received during the scan
operation by pressing the PTT before the
programmed hang-time ends. Check with your
dealer for details.

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted calls or
noise (a ÒnuisanceÓ Channel), you can temporarily
remove it from the scan list by performing a
Nuisance Channel Delete operation.
1. While the radio is on the Nuisance Channel,
press the Nuisance Channel Delete button
(only available if programmed by your dealer)
until you hear a tone.
2. Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
NOTE: You cannot perform a Nuisance Channel
Delete on a priority channel or if there is only
one remaining channel in the scan list.
ADDING A DELETED NUISANCE CHANNEL
BACK TO THE SCAN LIST
1. Press the Scan button to stop the scan
operation.
2. Press the Scan button again to re-start the
scan operation. The Deleted Nuisance
Channel is reinstated to the scan list.
PRIORITIZATION OF A SCAN LIST
MEMBER
You may want your radio to check a particular
channel more frequently for calls. Prioritization of
scan list members is done by your dealer using the
Customer Programming Software. Check with your
dealer for details.
Priority Channel
Ch1 Ch2 Ch3
None speciÞed
Ch4
Ch2 Ch1 Ch2 Ch3
Channel 2
Ch2 Ch4 Ch2 ...Ch1
Even though your radio has switched to a non-
priority channel, your radio will still check for activity
on the priority channel. If activity is detected the
radio will switch to the priority channel.
Scanning Sequence
...
Ch1
English
19