Table of Contents
Advertisement
7. RECEIVER IN - RJ45 Connector. Allows connection of the Xpress Bluetooth Streaming
Audio/Setup Module. Allows setup of the D2.1 via D2.1 Setup App and Bluetooth Module.
Also allows IR control of a connected Bluetooth streaming device via the Xpress Bluetooth
Module, using the D2.1 IR Remote or other properly programmed IR System Remote.
Using Cat5/5e/6 cable, connect to the RJ45 jack on the Xpress Bluetooth Setup/Streaming
Module.
8. STATUS - LED flashes or illuminates solid to indicate various setup modes.
Solid ON - Learn Mode
One Flash - Ready to learn Power, Volume UP, Volume DOWN, Mute, IN 3
Solid ON 1 Second - confirms learned command
OFF - Learn Mode OFF
9. USB - Provides 5VDC to Xpress Accessories.
D2.1 Side Vents
Even though the D2.1 will typical run cool, the side vents allow air to circulate through the
chassis allowing optimum performance, and besides...they just look cool...get it...air vents...
look cool...never mind...
One serious item...please be sure to not block the vents with wires or other objects that will
block the free flow of air through the amp.
D2.1
IMPORTANT! DO NOT BLOCK VENTS!
Shelf
7
Advertisement
Table of Contents
