Ir Learning; To Enter Learning Mode; Power; Volume Up - Xpress D2.1 User Manual

Digital 2.1 channel amplifier
Table of Contents

Advertisement

IR Learning

What...you don't want to have to use more than one remote to control your system??? WOW...
some people!!! Well...if you insist...here's what you can do to use a TV or other pre-pro-
grammed remote to control the D2.1. (You can also teach the IR commands from the D2.1 IR
Remote to a programmable IR system remote if you prefer.)
The D2.1 can learn IR commands for ON/OFF, Volume UP/DOWN, Mute and IN 3.
Please carefully follow the steps below to teach the D2.1 the IR commands to be used from
the remote to be used for system control.

TO ENTER LEARNING MODE

1. Press the Power button on the D2.1 IR Remote to turn D2.1 power OFF.
2. Sequentially press the Mute, IN 3 and Volume Down (-) buttons to enter the learning
mode.
3. Status LED will turn ON.

POWER

1. Press the Power button on the D2.1 IR Remote. The Status LED will flash once and turn
OFF.
2. Press the button on the system remote to be used for turning the D2.1 ON/OFF.
3. The Status LED should flash twice and turn OFF.
4. Press the button on the system remote again. The Status LED will flash once and turn ON
to confirm the learned code.
5. To exit Learning Mode, press IN 1, otherwise press the next button to be learned.

VOLUME UP

1. Press the Volume UP button on the D2.1 IR Remote. The Status LED will flash once and
turn OFF.
2. Press the button on the system remote to be used for Volume UP.
3. The Status LED should flash twice and turn OFF.
4. Press the button on the system remote again. The Status LED will flash once and turn ON
to confirm the learned code.
5. To exit Learning Mode, press IN 1, otherwise press the next button to be learned.

VOLUME DOWN

1. Press the Volume DOWN button on the D2.1 IR Remote. The Status LED will flash once
and turn OFF.
2. Press the button on the system remote to be used for Volume DOWN.
3. The Status LED should flash twice and turn OFF.
4. Press the button on the system remote again. The Status LED will flash once and turn ON
to confirm the learned code.
5. To exit Learning Mode, press IN 1, otherwise press the next button to be learned.
14

Advertisement

Table of Contents
loading

Related Products for Xpress D2.1

Table of Contents