Loading Battery; Insert Battery - Carson X10ET-XL CLIMB WARRIOR Instruction Manual

Loading Battery

Beware:
For charging the battery, only use the recommended
charger. Please consider the advice of the enclosed
instructions.
Charging procedure:
1 Connect the plug-in charger to wall socket.
2 Connect the battery to the charger.
3 Battery is fully charged when the status LED changes to green.
ATTENTION!
Never recharge the battery unattended.
You can use also 7.4V LiPo- and 7.2V NiMH batteries in your car be
operated.

Insert Battery

1 Insert the battery
2 Put the battery plate on it and
3 Fix it with the hook pins..
Advice
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before
being charged.
• Rechargeable batteries are only to be charged under adult supervi-
sion.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Regular examination of transformer or battery charger for any
damage to their cord, plug, enclosure and other parts.
18 CARSON X10ET-XL CLIMB WARRIOR 500404056